App feeds Are Not Applying Metering Rules App feeds Are Not Applying Metering Rules

App feeds Are Not Applying Metering Rules

Vijay Sharma Vijay Sharma

Did you set up time or view-based metering, but it is not showing up in the feeds of your app? 

If you have applied time-based or view-based metering, but the metering rule is not showing up in your feeds, make sure you have completed the below step as it is easy to miss.

1. Did you lock your feeds? 

After setting up the metering at the app level, you need to choose which feeds you want to apply the metering to and lock those feeds. Navigate to the applicable feed and click on "Settings."  Under the "Access" setting, make sure that the feed is changed to "Locked." Keep the Subscription/Paywall box checked (as well as any other applicable options) and once you save the feed should lock dynamically.

downloads.intercomcdn.comio18620860218f0299a6734716ae457999bimage-2.png

 

If you continue to have trouble getting the metering active in your app, contact us at success@mazsystems.com

 

Was this article helpful?

0 out of 0 found this helpful